Banner Picture
QTA Systems

DIY Loudspeaker Components

You are Here -- index -- loudspeaker kits -- speaker stands

Wood Speaker Stands

Column wood speaker stands

Column: Wood Speaker Stands

       These wood speaker stands are available in a variety of sizes / weight and height to suit a number of different applications. Constructed from pre-veneered MDF panels and solid hardwood edge lippings  the column stands feature a hollow centre section which may be dry sand or pebble filled to add extra damping and weight. Ideal as small speaker stands or for satellite speakers the top platforms are of hardwood, plywood or MDF depending upon application. Felt damping pads provide additional isolation between the speaker and stand. The bottom platforms are fitted with loudspeaker spikes as standard. Shown in the illustration is a lightweight stand to accompany our Mini Q miniature speaker.


Low profile loudspeaker stands

Low Profile Speaker Stand

       The low profile loudspeaker stands are available in standard or custom versions and are designed to raise floor standing Loudspeakers off of direct contact with the floor. Illustrated is a custom loudspeaker stand in solid Walnut which raises the speaker by around 90mm from floor level. For the more budget conscious, an alternative model stand in Ash and Birch plywood is shown. Standard designs suit Loudspeaker footprints of (180 - 250)mm wide and (300 - 400)mm deep. Each loudspeaker stand is fitted with hard felt damping pads to provide some isolation between the cabinet and stand whilst loudspeaker spikes provide decoupling between stand and floor.


Custom walnut low profile speaker stand

Custom Loudspeaker Stand

       The low profile loudspeaker stands are available in standard or custom versions and are designed to raise floor standing Loudspeakers off of direct contact with the floor. Illustrated is a custom loudspeaker stand in solid Walnut which raises the speaker by around 90mm from floor level. For the more budget conscious, an alternative model stand in Ash and Birch plywood is shown. Standard designs suit Loudspeaker footprints of (180 - 250)mm wide and (300 - 400)mm deep. Each loudspeaker stand is fitted with hard felt damping pads to provide some isolation between the cabinet and stand whilst loudspeaker spikes provide decoupling between stand and floor.


Adjustable height speaker stands

Adjustable Speaker Stands

       A solid but adjustable speaker stand constructed from MDF with a Birch plywood top platform. The height adjustment provides for an overall lift / adjustment of some 150mm above the nominal 450mm height. The top platform has hard felt damping pads to decouple the cabinet from the stand. The bottom platform features levelling spikes which are accessed from the top surface via adjusting knobs. The overall weight is approx 9kgms per speaker stand.



* Wooden Loudspeaker Stands
Order Code. description Options Price / Pr GBP
CSMQ Column stands to suit Mini Q Ash finish, Ash trim with spikes None £320
CSBV Column stands 525mm, oiled MDF, plywood top platform  On height From £205
CSSV Column stands 525mm, Ash veneer, with Ash top platform None £229
LPSA Low profile stand in solid Ash with Birch plywood platform On depth From £106
LPSO Low profile stand in solid Oak with Birch plywood platform On depth From £106
CUSTLPS Custom loudspeaker stands, Low Profile solid Walnut As reqd. From £223
ACS Adjustable speaker stands in MDF and Birch plywood None £233

paypal See BUY IT for further information.

All Prices include VAT @ 20%.