Feet for Loudspeakers and Hi-Fi Cabinets

Feet for Loudspeakers, Stands and Cabinets

    A selection of rubber feet for both cabinets and Hi-Fi equipment, providing an aesthetic finish to DIY cabinets, speaker enclosures and custom cases.

    1) A large smooth black rubber cabinet foot of some 38mm diameter and 19mm height. This foot has a steel insert permitting a 4 up load of some 200Kgms. The foot may be screwed or bolted (M5).

    2) Similar to CABFT1 but with a ribbed surface. Diameter is 37mm and overall height 16cm.

      Note: The 38mm cabinet feet are sold in packs of 4 and do not include fittings. The fittings, shown below, are either black Japanned wood screws for fixing to wood-based items OR stainless steel M5 machine screws and nuts. These may be used on metal-based items, with a 5mm through hole.

* (1 & 2) Large Cabinet Feet. Sold in packs of 4. Price per pack.

Order Code	Description	1+	6+
CABFT1	Large Smooth Rubber Foot - 38mm by 19mm	3.74 /4	3.56 /4
CABFT2	Large Ribbed Rubber Foot - 37mm by 16mm	3.15 /4	3.00 /4
CABSCR1	Screw Fittings for wooden cabinets - pack of 4	0.63 /4	0.60 /4
CABBLT1	Stainless Fittings for metal cabinets - pack of 4	1.58 /4	1.50 /4

Self Adhesive Cabinet Feet

    (3) A 20mm square rubber feet with a release paper and self-adhesive backing. Nominal height 8mm.

* (3) Self Adhesive Loudspeaker Feet. Packs of 4. Price per pack.

Order Code	Description	1+	6+
CABFT3	Self-adhesive Rubber (Stick-0n) Foot	1.71 /4	1.63 /4

High-End Rubber Feet

    4) High-end, hard, rubber Feet with vibration-reducing properties, height 20mm and diameter 25mm. Maximum load per set of 4 is 30kg. The rubber is encased in an attractive gold finish metal band. Non-marking non-slip, rubber base, also supplied with a set of self-adhesive pads.

* (4) High-end Cabinet Feet, Sold in packs of 4. Price per pack.

Order Code	Description	1+	6+
CABFT4	Circular Hard Rubber Foot, diam. 25mm x ht. 20mm	12.47 /4	11.88 /4

Small Loudspeaker Cabinet Feet

    5) A smaller, circular, 22mm diameter, 8mm high, rubber cabinet foot for Hi-Fi components. Can be screwed, No. 4 Screws, bolted, M3 bolts, or attached with double-sided tape. The cabinet foot has a steel insert to add strength to the design.

* (5) Small Cabinet Feet. Sold in packs of 4. Price per Pack.

Order Code	Description	1+	6+
CABFT5	Circular 22mm Rubber Foot only	1.10 /4	1.05 /4

Cabinet Feet Fittings

* Loudspeaker Cabinet Feet Fixing Kits.

Order Code	Description	1+	6+
CABSCR5	Screw Fittings for wooden cabinets - pack of 4	0.16 /4	0.15 /4
CABBLT5	Stainless Fittings for metal cabinets - pack of 4	0.68 /4	0.65 /4

See BUY IT for Further Information.

All Prices include VAT @ 20%.